A full-function Sonic Maximizer, +23dB of output headroom, balanced or unbalanced I/O, 115dB signal to noise ratio and Hard-wire bypass.
+4dBu balanced line (1/4" tip-ring-sleeve and XLR inputs and outputs)
+23dBu headroom
Active balanced outputs
Hardwire bypass
Bypass switch for comparison of processed signal with unprocessed signal
Frequency Response | |
Model | 882i |
Process Mode: | Program controlled |
Bypass Mode | 10Hz to 50kHz, +/- 0.5dBu, 0dBu input |
Signal to Noise Ratio | 115dB Process IN |
THD, Process mode | less than 0.025% 20-20kHz |
Bypass mode | less than 0.002% 20-20kHz |
Maximum Output | +23dBu (may vary due to control settings) |
Input Impedance | 14.7K Ohms, balanced 1/4" stereo phone jack or XLR jack. Pin #2 is the hot or "+" signal. |
Output ImpedanceOutput Impedance | 600 Ohms, balanced 1/4" stereo phone jack or XLR jack. Pin #2 is the hot or "+" signal. |
Sensitivity | -45dBu for maximum process |
Maximum Process | +12dBu boost at 5kHz, 0dBu input |
Lo Contour | +12dBu adjustment at 50Hz, 0dBu input |
A full-function Sonic Maximizer, +23dB of output headroom, balanced or unbalanced I/O, 115dB signal to noise ratio and Hard-wire bypass.
+4dBu balanced line (1/4" tip-ring-sleeve and XLR inputs and outputs)
+23dBu headroom
Active balanced outputs
Hardwire bypass
Bypass switch for comparison of processed signal with unprocessed signal
Frequency Response | |
Model | 882i |
Process Mode: | Program controlled |
Bypass Mode | 10Hz to 50kHz, +/- 0.5dBu, 0dBu input |
Signal to Noise Ratio | 115dB Process IN |
THD, Process mode | less than 0.025% 20-20kHz |
Bypass mode | less than 0.002% 20-20kHz |
Maximum Output | +23dBu (may vary due to control settings) |
Input Impedance | 14.7K Ohms, balanced 1/4" stereo phone jack or XLR jack. Pin #2 is the hot or "+" signal. |
Output ImpedanceOutput Impedance | 600 Ohms, balanced 1/4" stereo phone jack or XLR jack. Pin #2 is the hot or "+" signal. |
Sensitivity | -45dBu for maximum process |
Maximum Process | +12dBu boost at 5kHz, 0dBu input |
Lo Contour | +12dBu adjustment at 50Hz, 0dBu input |
